Geotechnical & Materials Laboratory Testing in Wisconsin


Materials Testing

 Aggregate

used in your construction projects must meet strict regulations and quality standards.

Using the following tests CGC personnel use our state-of-the-art testing laboratories to ensure the aggregates specified for use in your projects meets or exceeds the highest quality and performance requirements established by state, national and international standards...

  • Gradation Analysis
  • LA Abrasion
  • Percentage Crushed and Uncrushed Particles
  • Presence of Deleterious Particles and Absorption Characteristics
  • Soundness
  • Freeze-Thaw
  • WisDOT Quality Testing
 Asphalt

testing ensures the properties of asphalt mixes and finished asphalt pavements meet or exceed regulatory and quality standards.

Using the following tests CGC personnel use our state-of-the-art testing laboratories to ensure the asphalt specified for use in your projects meets or exceeds the highest quality and performance requirements established by state, national and international standards...

  • Design of Bituminous Mixtures using Superpave Method with associated tests
  • Field Documentation during Pavement Construction
  • Plant Inspection and Process Control
 Concrete

testing ensures the properties of concrete mixes meet or exceed regulatory and quality standards.

Using the following tests CGC personnel use our state-of-the-art testing laboratories to ensure concrete specified for use in your projects meets or exceeds the highest quality and performance requirements established by state, national and international standards...

  • Design of Low and High Strength Concrete Mixes
  • Diamond Core Drilling
  • Non-Destructive Testing and Evaluation
  • Physical Testing of Portland Cement
  • Testing of Concrete for its Compressive and Flexural Strengths
 Masonry

testing ensures the properties of masonry components and assemblies meet or exceed regulatory and quality standards.

Using the following tests CGC personnel use our state-of-the-art testing laboratories to ensure masonry specified for use in your projects meets or exceeds the highest quality and performance requirements established by state, national and international standards...

  • Block and Brick Testing
    • Absorption and Linear Shrinkage
    • Compressive Strength
    • Prism Tests
  • Design of Mortar Mixes
  • Mortar & Grout Testing

Geotechnical Testing

 Surface/Subsurface

investigation and testing ensures the properties of soil(s) meet or exceed regulatory and quality standards.

Using the following tests CGC personnel use our state-of-the-art testing laboratories to ensure the soil(s) to be used in your project meets or exceeds the highest quality and performance requirements established by state, national and international standards...

  • Atterberg Limits
  • CBR Test
  • Consolidation Test
  • Constant and Falling Head Permeability Test
  • Direct Shear Test
  • Index Testing
  • Moisture Content
  • Moisture Density Curves
  • Organic Content
  • Particle Size Analysis
  • Relative Density
  • Shrinkage Limit Test
  • Soil Swell Expansive Test
  • Specific Gravity
  • Triaxial Compression Test
  • Unconfined Compressive Strength

Laboratory Test Methods and Governing Standards

CGC laboratory tests and the standards they are typically performed under
MaterialTestGoverning standard
SoilAtterberg limitsASTM D4318; WTM T89 and AASHTO T90
SoilMoisture contentASTM D2216; WTM T255 for aggregate
SoilParticle size analysisASTM D6913 (sieve), ASTM D7928 (hydrometer)
SoilMoisture density curvesASTM D698 / D1557; AASHTO T99 / T180
SoilSpecific gravityASTM D854
SoilOrganic contentASTM D2974
SoilCBRASTM D1883
SoilConsolidationASTM D2435
SoilConstant and falling head permeabilityASTM D2434; ASTM D5084
SoilDirect shearASTM D3080
SoilTriaxial compressionASTM D2850 (UU); ASTM D4767 (CU)
SoilUnconfined compressive strengthASTM D2166
SoilRelative densityASTM D4253 / D4254
SoilShrinkage limit and swellASTM D4943; ASTM D4546
AggregateGradation analysisWTM T27 and T11 (AASHTO T27, T11)
AggregateLA abrasionAASHTO T96; ASTM C131
AggregateCrushed and uncrushed particlesWTM D5821 (ASTM D5821)
AggregateAbsorptionAASHTO T85 (coarse); AASHTO T84 (fine)
AggregateSoundness and freeze-thawAASHTO T104; AASHTO T103
AsphaltSuperpave mixture designWisDOT standard specification 460.2.7; AASHTO R35, M323, T312
ConcreteCompressive strengthWTM T22 (ASTM C39)
ConcreteFlexural strengthWTM T97 (ASTM C78)
ConcreteDiamond core drilling and testingASTM C42
ConcretePortland cement physical testingASTM C150 requirements; ASTM C109, C191
ConcreteNon-destructive testingASTM C805, C803, C597
MasonryBrick absorption and shrinkage; compressive strengthASTM C67
MasonryBlock testingASTM C140
MasonryPrism testsASTM C1314
MasonryMortar design and testingASTM C270; ASTM C780
MasonryGrout testingASTM C1019

WTM refers to a Wisconsin test method published for WisDOT work and generally parallels the AASHTO or ASTM method shown. Confirm the method and edition required by your contract or specification.

Laboratory Qualification and Personnel Certification

WisDOT’s 2025 Standard Specifications, section 701, require that contractor and commercial laboratories performing contract testing be qualified through the Wisconsin laboratory qualification program (opens in a new tab) and that sampling and testing be performed by technicians certified through the Highway Technician Certification Program at or above the levels in table 701-1 (section 701 (opens in a new tab)). Our Madison laboratory is accredited for HMA testing (opens in a new tab) by the AASHTO Materials Reference Laboratory and WisDOT; see our asphalt mixture design and testing page for details.

Frequently Asked Questions About Laboratory Testing

Which laboratory tests does CGC perform?

CGC performs soil tests (Atterberg limits, CBR, consolidation, permeability, direct shear, triaxial, unconfined compression, moisture density curves, particle size analysis and more), aggregate tests (gradation, LA abrasion, crushed particles, absorption, soundness and freeze-thaw), asphalt mixture design using the Superpave method, concrete tests (mix design, compressive and flexural strength, diamond core drilling, non-destructive testing and Portland cement physical testing) and masonry tests (block and brick, prisms, mortar and grout).

Which standards govern soil index and aggregate gradation testing on WisDOT work?

WisDOT's 2025 Standard Specifications, section 701, table 701-1, list WTM T11 and WTM T27 for aggregate gradation, WTM T255 for aggregate moisture content, WTM D5821 for fractured faces, WTM T89 for liquid limit and AASHTO T90 for plastic limit and plasticity index. Plastic limit testing requires GRADINGTEC-I certification and liquid limit testing requires ATTS certification.

What laboratory qualification does WisDOT require for contract testing?

Section 701.1.2.5 requires that contractor and commercial laboratories performing testing under a WisDOT contract be qualified through the Wisconsin laboratory qualification program. CGC's Madison laboratory is accredited for HMA testing by the AASHTO Materials Reference Laboratory (AMRL) and WisDOT.

Which tests measure the strength of concrete and masonry?

Concrete compressive strength is tested under WTM T22 (ASTM C39) and flexural strength under WTM T97 (ASTM C78). Masonry units are tested for compressive strength and absorption under ASTM C67 or C140, and assemblages by prism testing under ASTM C1314.

Where are CGC's laboratories located?

CGC provides laboratory testing from its Madison and West Allis, Wisconsin offices.

Reference Sources

 Technical references last reviewed by: CSG